We are releasing limited quantity of each complete upper for this year. If you are interested, please contact us.
T91 Complete Upper Assembly With 16-inch(Slim), 14.5-inch(Heavy), and 12.5-inch(Heavy) Profile Chrome Lined Barrel.
*** Lead Time 5 to 7 days ***
SPECS:
T91 MIL-SPEC Upper Receiver.
T91 MIL-SPEC Flash Hider Compensator.
T91 MIL-SPEC Bolt Carrier Group.
T91 MIL-SPEC Charging Handle.
T91 Mil-SPEC Eject Port Cover.
T91 MIL-SPEC Polymer Handguard.
T91 MIL-SPEC Front Sight Base Pinned and Installed, Gas Port Drilled.
Barrel and extension are manganese phosphate finish per MIL-DTL-16232G, Type M, Class I.
Barrel Bore and chamber chrome plated per ASM-2406L, 5.56 NATO, 1:7 Twist.
Barrel Weight: 32 oz.
Barrel Material: 41V50
Barrel: 1/2x28" muzzle threading, button rifled, air gauged, and stress relieved.
Barrel: Standard feed ramp.
All Major Parts Serial Marked.
All Upper Will Be Test Fired Before Shipping.
Certified Gunsmith Recommended.
** Pictured Carry Handle Rear Sight Not Included.
NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.
T91 Complete Upper Assembly With Chrome Lined Barrel
Moderators: e292644, blueeyedwolf
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
You do not have the required permissions to view the files attached to this post.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
MSRP Pre-Set $900. member here will receive discount.
14'5" muzzle device will not pinned or welded unless everybody want it done, we will do it before shipping.
14'5" muzzle device will not pinned or welded unless everybody want it done, we will do it before shipping.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
We now offer pinned and welded flash hider for 14.5" barrel and complete upper as an option.
-
- II
- Posts: 9
- Joined: Thu Feb 13, 2020 8:14 pm
- Country: USA
- Location: Va
Great news that the pin and welded option is available on the 14.5 heavy barrel!
Few questions:
1) The muzzle device that is pinned and welded, is it the SKU T91FHCC01 (flashider/compensator)?
2) just want to 2x check the 14.5 with the pin and welded muzzle device the overall barrel is > 16”?
3)feed ramp, it stated as standard, it would have no issues going on the standard wolf a1 upper receivers?
Thanks, looking forward to swap this barrel on my wolf a1
Few questions:
1) The muzzle device that is pinned and welded, is it the SKU T91FHCC01 (flashider/compensator)?
2) just want to 2x check the 14.5 with the pin and welded muzzle device the overall barrel is > 16”?
3)feed ramp, it stated as standard, it would have no issues going on the standard wolf a1 upper receivers?
Thanks, looking forward to swap this barrel on my wolf a1
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
SS73 wrote: ↑Sat Feb 29, 2020 4:13 am Great news that the pin and welded option is available on the 14.5 heavy barrel!
Few questions:
1) The muzzle device that is pinned and welded, is it the SKU T91FHCC01 (flashider/compensator)?
Yes
2) just want to 2x check the 14.5 with the pin and welded muzzle device the overall barrel is > 16”?
Yes, barrel plus muzzle device is little bit over 16".
3)feed ramp, it stated as standard, it would have no issues going on the standard wolf a1 upper receivers?
Wolf A1 should have standard upper without M4 feed ramp. Please double check before you placing the order.
Thanks, looking forward to swap this barrel on my wolf a1
You do not have the required permissions to view the files attached to this post.
-
- II
- Posts: 29
- Joined: Sat Oct 07, 2017 4:27 pm
The T91 uppers are superb. I got one and will be getting another. That said I do have a couple of the Wolf uppers as well. An 11.5 in., an early 12.0 in., not the currently offered 12.5 in and a 16 inch. Those also are great. They shoot around 1.75- 2.5MOA with steel case ammo and are very reliable. The T91 I got shoots groups half that size with the same ammo. It was GTG right out of the box. It is equal to the SIG uppers that are currently available lacking only the OTB barrel extension. Appreciate Sean being able to make these available. Just have to score another before any law changes. (Hopefully none).
- DatChuan
- II
- Posts: 13
- Joined: Fri Apr 03, 2020 10:01 pm
- Country: USA
- Location: CA
Just a side question sorted related to this, how heavy of the buffer weight should I use for 12.5 inch upper versions? And does the carbine falt wire buffer springs from the market work well with the 12.5 inch upper?
- apex
- L
- Posts: 85
- Joined: Sun Dec 09, 2018 1:59 pm
- Country: USA
- Location: MD
At minimum the usual recommendation for piston uppers is an H2 (4.6oz), but mine will run a 3.0oz + standard spring no problem.
I don't know about flat springs though.
-
- I
- Posts: 1
- Joined: Mon Jan 25, 2021 10:19 am
- Country: USA
- Location: Nevada
Good Morning from Las Vegas,
How do I order a 12.5 version? I know it’s sold out from the website. Just wondering if some are available for forum members? I know a member’s price was also mentioned.
Thank You
Jorge
How do I order a 12.5 version? I know it’s sold out from the website. Just wondering if some are available for forum members? I know a member’s price was also mentioned.
Thank You
Jorge