Retro A1 lower

Moderators: e292644, blueeyedwolf

Post Reply
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

It seems the retro A1 lower are correct for the T91 but they are out of stock.
http://www.nodakspud.com/AR%20Lowers.htm
I can't find them anywhere else.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Wow, look the price. :x
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

I know. I saw this website talk about the modification (scroll down to about mid-page)
I think I'm going to try my luck on my Dremel on a 80% lower and see if I can come close.
jpetro
I
Posts: 2
Joined: Thu Dec 21, 2017 8:06 pm

Brownels has some in stock but not 80% https://www.brownells.com/rifle-parts/r ... 74441.aspx
jpetro
I
Posts: 2
Joined: Thu Dec 21, 2017 8:06 pm

I also found 80's already engraved but they are not a1

https://www.atomicengraving.com/product ... 1-replica/
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

We are working on original T91 80% lower, may be able to get them next year.

T91Lower00.jpg
T91Lower01.jpg
You do not have the required permissions to view the files attached to this post.
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

Just got my 80% back from John Brace (Braceman) (johnbrace at frontier.com) , he did the A1 profile mod as well as the engraving. Very nicely done. Check it out.
22.jpg
11.jpg
You do not have the required permissions to view the files attached to this post.
firearms
II
Posts: 28
Joined: Thu May 11, 2017 8:28 pm

22.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Cool, very close to the original.
JPurp
II
Posts: 7
Joined: Tue Jul 11, 2017 11:26 am

I used one of these.

https://www.centurionarms.com/product-p/80t91fl.htm

It came out well.

Kinda pricey like the Nodak but it looks good.

-JP
Post Reply