Which barrel to use with T91 front sight assembly?

Moderators: e292644, blueeyedwolf

Post Reply
darkarmour
II
Posts: 15
Joined: Thu Mar 22, 2018 11:58 pm
Country: USA
Location: PA

I bought a T91 front sight assembly from the Store, but am now trying to figure out what barrel I need. The gas piston length requires the front sight assembly to sit somewhere between where it would sit on an intermediate length and a carbine length barrel. A standard carbine barrel will not work, as the gas port is drilled in the wrong location for the T91 gas piston and front sight assembly.

Randall of AR15Barrels says CMMG used to make a barrel that you could turn down as appropriate, but he does not know if they still make one.

Any ideas, folks?
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Any AR-15 Mid-Length gas system barrel with 0.750" gas port journal should work. They all need to re-profile the gas port journal shoulder toward barrel extension about 0.50" (actual specs may vary due to every barrel mfg has slightly different specs.) to re-align piston rod with BCG.
darkarmour wrote: Tue Jun 26, 2018 6:30 pm I bought a T91 front sight assembly from the Store, but am now trying to figure out what barrel I need. The gas piston length requires the front sight assembly to sit somewhere between where it would sit on an intermediate length and a carbine length barrel. A standard carbine barrel will not work, as the gas port is drilled in the wrong location for the T91 gas piston and front sight assembly.

Randall of AR15Barrels says CMMG used to make a barrel that you could turn down as appropriate, but he does not know if they still make one.

Any ideas, folks?
darkarmour
II
Posts: 15
Joined: Thu Mar 22, 2018 11:58 pm
Country: USA
Location: PA

Thanks. I'll try this.
Post Reply