Post Your T91/Wolf A1 Parts and Accessories Wish Lists Here

Moderators: e292644, blueeyedwolf

User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

You're welcome!
Our next shipment should arrived within three weeks according to factories. Soon, we will receive limited Qt'y Mil-Spec Carry Handle and Simple Rear Sights with Tritium insert.
Kilo 1-1 wrote: Fri Nov 10, 2017 11:13 pm I would also be interested in the simple back up sight (not the carry handle), hoping more will be coming in. Patiently waiting here for the buffer tube and stock as well. Thanks for listening to our feedback.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

e292644 wrote: Sat Nov 11, 2017 6:12 am You're welcome!
Our next shipment should arrived within three weeks according to factories. Soon, we will receive limited Qt'y Mil-Spec Carry Handle and Simple Rear Sights with Tritium insert.
Kilo 1-1 wrote: Fri Nov 10, 2017 11:13 pm I would also be interested in the simple back up sight (not the carry handle), hoping more will be coming in. Patiently waiting here for the buffer tube and stock as well. Thanks for listening to our feedback.
Sounds good. Any possibility of getting the proper safety selectors in as well?
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Absolutely, original T91 safety selector will arrive at the same time along with other parts.
Kilo 1-1 wrote: Tue Nov 14, 2017 12:04 am
Sounds good. Any possibility of getting the proper safety selectors in as well?
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

Another quick question, are the T91 rear sights (simple model) are they airsoft copies or actual units that can be used on live fire weapons? Someone was asked this earlier elsewhere and I wanted some clarification, thanks.
User avatar
Arkane
C
Posts: 150
Joined: Tue Jun 20, 2017 12:35 pm

Kilo 1-1 wrote: Wed Nov 15, 2017 2:20 pm Another quick question, are the T91 rear sights (simple model) are they airsoft copies or actual units that can be used on live fire weapons? Someone was asked this earlier elsewhere and I wanted some clarification, thanks.
I've got one and zeroed it and at least for a thousand + rounds it's held zero well. The adjustments are good positive clicks and despite the "different than what I'm used to" spring loaded locking mech it is pretty darn solid.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Yes, there's some AirSoft parts floating around which may cause issues if someone try to install it on live fire weapons.
Our products are all 100% genuine Mil-Spec for T91 came from same factories from Taiwan. I've visited them and confirmed they are legit.
Kilo 1-1 wrote: Wed Nov 15, 2017 2:20 pm Another quick question, are the T91 rear sights (simple model) are they airsoft copies or actual units that can be used on live fire weapons? Someone was asked this earlier elsewhere and I wanted some clarification, thanks.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

Ok, thanks for the clarification. I also appreciate how you guys made the disclaimer regarding the quad rail in the store as well. I'll be waiting for the sights and other parts to come back in stock.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Quad-Rail Handguard has been installed and tested on Mil-Spec T91 Rifle in Taiwan without any issue. It's just little bit heavier than original T91 Keymod Handguard.
Kilo 1-1 wrote: Wed Nov 15, 2017 4:02 pm Ok, thanks for the clarification. I also appreciate how you guys made the disclaimer regarding the quad rail in the store as well. I'll be waiting for the sights and other parts to come back in stock.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

e292644 wrote: Wed Nov 15, 2017 6:01 pm Quad-Rail Handguard has been installed and tested on Mil-Spec T91 Rifle in Taiwan without any issue. It's just little bit heavier than original T91 Keymod Handguard.
Kilo 1-1 wrote: Wed Nov 15, 2017 4:02 pm Ok, thanks for the clarification. I also appreciate how you guys made the disclaimer regarding the quad rail in the store as well. I'll be waiting for the sights and other parts to come back in stock.
I figured that'd be the case. I read a brief review from a guy that bought one for his T91 upper and had 2,000 rounds with it on without problems.
tinydata
I
Posts: 3
Joined: Sat Dec 02, 2017 8:56 am

Is there any ETA on a new shipment of collapsible stocks?
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

There's shortage on buffer tube and its under manufacturing process right now. Shouldn't take more than 3-4 weeks we hope.
tinydata
I
Posts: 3
Joined: Sat Dec 02, 2017 8:56 am

e292644 wrote: Sat Dec 02, 2017 9:08 am There's shortage on buffer tube and its under manufacturing process right now. Shouldn't take more than 3-4 weeks we hope.
Excellent, can't wait to order a bundle of parts
Jiro
II
Posts: 29
Joined: Sat Oct 07, 2017 4:27 pm

I would like Santa to bring me some of the bolt on pic rails ( tri rails) just like in the picture at the top of this page. They go over the stock hand guard.
Can you work that for me???? @onion9@
Iamscotticus
L
Posts: 87
Joined: Thu Nov 16, 2017 9:00 pm

@onion9@ @onion9@ @onion9@
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Santa working very hard to fulfill wish lists. @onion7@
Post Reply