Post Your T91/Wolf A1 Parts and Accessories Wish Lists Here

Moderators: e292644, blueeyedwolf

Post Reply
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

We are gathering information on what item(s) you wish to have for your T91 / Wolf A1 build.
Please reply here and we will try our best to locate them for you.

Thank you!
T91 Tactical Support Team
Kaztma
II
Posts: 9
Joined: Thu May 11, 2017 5:58 pm

T91 gasblock.
User avatar
t44e6
II
Posts: 12
Joined: Tue Oct 10, 2017 2:18 pm

T91 Gas block, rear sight, carry handle
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

3rd Gen. T91 gas block coming soon (Spring, 2018), designed for standard AR-15 0.75" gas block diameter which can be installed on most of AR-15 barrel around the market. It means you can easily swap to chrome-lined, stainless steel, contoured.... even 11.5" or 18".

And more to come....
T91Lower00.jpg
T91Lower01.jpg
T91Lower1.jpg
T91Lower2.jpg
T91Lower3.jpg
T91BoltCarrier.jpg
T91Bayonet.jpg
You do not have the required permissions to view the files attached to this post.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

e292644 wrote: Mon Nov 06, 2017 5:25 am 3rd Gen. T91 gas block coming soon (Spring, 2018), designed for standard AR-15 0.75" gas block diameter which can be installed on most of AR-15 barrel around the market. It means you can easily swap to chrome-lined, stainless steel, contoured.... even 11.5" or 18".

And more to come....
Just for clarification, this new 3rd gen GB will work with the standard Wolf A1 barrel? Is it a single piece unit or a 2 piece unit like the T91S gas blocks that came with the Wolf uppers? I was thinking of getting one of the classic mil-spec gas blocks, but this new design has my interest.

Any word on when stocks and buffer tubes are coming back in? Thanks for the updates!
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

3rd Gen GB will only work with standard AR-15 barrel with 0.75" GB landing, not for Wolf barrel.

As for the stock, buffer tube, and end plate, it will take another few weeks.
Kilo 1-1 wrote: Tue Nov 07, 2017 11:09 am Just for clarification, this new 3rd gen GB will work with the standard Wolf A1 barrel? Is it a single piece unit or a 2 piece unit like the T91S gas blocks that came with the Wolf uppers? I was thinking of getting one of the classic mil-spec gas blocks, but this new design has my interest.

Any word on when stocks and buffer tubes are coming back in? Thanks for the updates!
Qwerty
II
Posts: 40
Joined: Thu Jun 01, 2017 6:26 am

I'm interested in the bolt carriers. What finish is that on the gray colored?

Thanks
Jim
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

It just after sandblasting prepare for coating, and these BCG workmanship is much more better compared with Wolf's.
Qwerty wrote: Wed Nov 08, 2017 7:19 am I'm interested in the bolt carriers. What finish is that on the gray colored?

Thanks
Jim
dmsdog
II
Posts: 12
Joined: Tue Sep 19, 2017 7:07 am

Green Mountain Barrel Company is willing to produce chrome-lined T91 military barrels for us. Minimum quantity is 100 barrels. Price is very reasonable for each barrel, but 100 barrels is more that I need or can afford.
Serendipitously
II
Posts: 5
Joined: Wed Nov 08, 2017 7:10 pm

Are we still going to get the 0.625" milspec gas blocks? Would be extremely interested in those barrels if we can get the original gas blocks.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Here's the differences between the T91 and Wolf A1 barrel profile.
For T91 Mil-Spec barrel, its has 15mm (0.59") gas port landing.
For Wolf A1 commercial barrel, its has 18mm (0.708") gas port landing.

Earlier this summer we've got some special ordered Mil-Spec and commercial style gas blocks which was modified to 0.625" (AR-15 Pencil profile, 15.875mm) and 0.75" (AR-15 Standard, 19.05mm) to fit U.S. AR-15 barrels, but it's no longer available (For special order only).
To address T91 owner's needs in the U.S., we realized it will add more benefits to T91 owners if the gas block can be installed on popular AR-15 Standard barrel which is 0.75" (19.05mm) gas port landing also make it easy to swap out any barrel anytime.
If we received more demand on 15.875mm (0.625") gas block for pencil profile barrel, we may special order it as well.
Serendipitously wrote: Wed Nov 08, 2017 8:19 pm Are we still going to get the 0.625" milspec gas blocks? Would be extremely interested in those barrels if we can get the original gas blocks.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

e292644 wrote: Thu Nov 09, 2017 7:50 am Here's the differences between the T91 and Wolf A1 barrel profile.
For T91 Mil-Spec barrel, its has 15mm (0.59") gas port landing.
For Wolf A1 commercial barrel, its has 18mm (0.708") gas port landing.

Earlier this summer we've got some special ordered Mil-Spec and commercial style gas blocks which was modified to 0.625" (AR-15 Pencil profile, 15.875mm) and 0.75" (AR-15 Standard, 19.05mm) to fit U.S. AR-15 barrels, but it's no longer available (For special order only).
To address T91 owner's needs in the U.S., we realized it will add more benefits to T91 owners if the gas block can be installed on popular AR-15 Standard barrel which is 0.75" (19.05mm) gas port landing also make it easy to swap out any barrel anytime.
If we received more demand on 15.875mm (0.625") gas block for pencil profile barrel, we may special order it as well.
Serendipitously wrote: Wed Nov 08, 2017 8:19 pm Are we still going to get the 0.625" milspec gas blocks? Would be extremely interested in those barrels if we can get the original gas blocks.
I for one would be interested in the original Mil-spec gas block and would get the barrel re-profiled for it.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

Noted!
Kilo 1-1 wrote: Thu Nov 09, 2017 10:38 am I for one would be interested in the original Mil-spec gas block and would get the barrel re-profiled for it.
Serendipitously
II
Posts: 5
Joined: Wed Nov 08, 2017 7:10 pm

Kilo 1-1 wrote: Thu Nov 09, 2017 10:38 am I for one would be interested in the original Mil-spec gas block and would get the barrel re-profiled for it.
+1 to that.
Kilo 1-1
II
Posts: 26
Joined: Sun Oct 29, 2017 2:29 pm

I would also be interested in the simple back up sight (not the carry handle), hoping more will be coming in. Patiently waiting here for the buffer tube and stock as well. Thanks for listening to our feedback.
Post Reply