T91 Lightweight Front Sight Base:
Teaser - T91 Lightweight Front Sight Base
Moderators: e292644, blueeyedwolf
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
You do not have the required permissions to view the files attached to this post.
-
- L
- Posts: 60
- Joined: Thu Oct 12, 2017 3:27 pm
I saw this in the store. It said something about needing a 0.750" gas journal barrel and it won't fit on the Wolf A1. I just measured my Wolf A1 without taking the block off and it seems to be 0.750" so what am I missing?
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
Would you post photos showing how you measuring the barrel?
shaocaholica wrote: ↑Mon Apr 09, 2018 11:56 am I saw this in the store. It said something about needing a 0.750" gas journal barrel and it won't fit on the Wolf A1. I just measured my Wolf A1 without taking the block off and it seems to be 0.750" so what am I missing?
-
- L
- Posts: 60
- Joined: Thu Oct 12, 2017 3:27 pm
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
I don't have their recent batch on hand, they may have changing the barrel profile closed to AR-15 standard.
Anyway, just snap a photo where you measured it with caliper.
Anyway, just snap a photo where you measured it with caliper.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
If you could just measure the barrel size in front of front sight gas block and it will tell the estimate of gas port journal size.
shaocaholica wrote: ↑Mon Apr 09, 2018 2:46 pm I'm not measuring that accurately because I haven't taken the original block off. What's supposed to be different? From poking around the outside with calipers, it looks like a 0.750" journal.
-
- L
- Posts: 60
- Joined: Thu Oct 12, 2017 3:27 pm
With the 14.5 and 12.5 model, the barrel begins to taper immediately but that’s how I’m doing it. With the calipers at the edge of the gas block. I’ll try to post a photo this week.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
Here's a example of 16" upper, just the barrel before gas port journal.
You do not have the required permissions to view the files attached to this post.
-
- II
- Posts: 9
- Joined: Sat Mar 17, 2018 6:39 am
- Country: USA
- Location: FL
Been looking at photos of T91 rifles and I've yet to see a single photo of a military rifle with a smooth sided FSB. All of them have a small step in the middle. Any ideas on when the transition was made to the smooth sided FSB? Anybody found photos of them in use?
You do not have the required permissions to view the files attached to this post.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
There's no transition for military, they stay the same. We specifically modified them for U.S. market due to the barrel size.
Less than 1/16" just too thin for safety concern.
Less than 1/16" just too thin for safety concern.
flick wrote: ↑Thu Apr 19, 2018 1:34 pm Been looking at photos of T91 rifles and I've yet to see a single photo of a military rifle with a smooth sided FSB. All of them have a small step in the middle. Any ideas on when the transition was made to the smooth sided FSB? Anybody found photos of them in use?