T91 tactical 80%

Moderators: e292644, blueeyedwolf

Post Reply
User avatar
codyphillips48
II
Posts: 39
Joined: Mon Apr 23, 2018 11:14 am
Country: USA
Location: FLORIDA

Well today my A1 upper came in from classic firearms. I installed the pins in my lower to test fit the upper to the lower and see if any issues came up. So i found one. when you tilt the upper up with the front pin in it wont flip up. Looks like the upper lug is a little big. Ill have to try the upper out on my other AR at home. Pic will come once i have a min to load them to the computer. This issue wont be a problem as I have a anti tilt h2 buffer
User avatar
codyphillips48
II
Posts: 39
Joined: Mon Apr 23, 2018 11:14 am
Country: USA
Location: FLORIDA

rsz_20180817_102518.jpg
20180817_114643.jpg
20180817_114706.jpg
20180817_114634.jpg
20180817_114654.jpg
20180817_114728.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
e292644
Site Admin
Posts: 453
Joined: Thu Apr 20, 2017 5:47 pm
Country: USA
Location: AZ
Contact:

I see it now. T91 and Wolf A1 upper received front lock block chamfer need to be round up more.

Solution for now:
File or Dremel off interference area on lower receiver.

Here's AR-15 vs T91 upper receiver:
AR vs T91.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
codyphillips48
II
Posts: 39
Joined: Mon Apr 23, 2018 11:14 am
Country: USA
Location: FLORIDA

e292644 wrote: Fri Aug 17, 2018 7:15 pm I see it now. T91 and Wolf A1 upper received front lock block chamfer need to be round up more.

Solution for now:
File or Dremel off interference area on lower receiver.

Here's AR-15 vs T91 upper receiver:
AR vs T91.jpg
Its not to big of a deal. Im gonna run the H2 buff anyways so ill have to depin the whole thing anyways to remove it. Just noting a issue so someone else would know ahead of time. Not a big thing in my case @onion36@
Post Reply