T91 tactical 80%
Moderators: e292644, blueeyedwolf
- codyphillips48
- II
- Posts: 39
- Joined: Mon Apr 23, 2018 11:14 am
- Country: USA
- Location: FLORIDA
Well today my A1 upper came in from classic firearms. I installed the pins in my lower to test fit the upper to the lower and see if any issues came up. So i found one. when you tilt the upper up with the front pin in it wont flip up. Looks like the upper lug is a little big. Ill have to try the upper out on my other AR at home. Pic will come once i have a min to load them to the computer. This issue wont be a problem as I have a anti tilt h2 buffer
- codyphillips48
- II
- Posts: 39
- Joined: Mon Apr 23, 2018 11:14 am
- Country: USA
- Location: FLORIDA
You do not have the required permissions to view the files attached to this post.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
I see it now. T91 and Wolf A1 upper received front lock block chamfer need to be round up more.
Solution for now:
File or Dremel off interference area on lower receiver.
Here's AR-15 vs T91 upper receiver:
Solution for now:
File or Dremel off interference area on lower receiver.
Here's AR-15 vs T91 upper receiver:
You do not have the required permissions to view the files attached to this post.
- codyphillips48
- II
- Posts: 39
- Joined: Mon Apr 23, 2018 11:14 am
- Country: USA
- Location: FLORIDA
Its not to big of a deal. Im gonna run the H2 buff anyways so ill have to depin the whole thing anyways to remove it. Just noting a issue so someone else would know ahead of time. Not a big thing in my case