SBR T91
Moderators: e292644, blueeyedwolf
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
Nice, thanks for sharing.
-
- II
- Posts: 29
- Joined: Sat Oct 07, 2017 4:27 pm
Mine but still a pistol with full size rifle.
![Image](http://i.imgur.com/hxo28zw.jpg)
My question to you is I read your project on AR15 and you mentioned you opened the GP to 0.093 which is a #42 bit. You put the 0.093 as a #34.
I opened mine to 0.094 and it would not hold open on an empty mag but would chamber another round 85% of the time. A #37 bit opened to 0.109 was what was necessary for proper function. Thoughts?
Thanks.
- e292644
- Site Admin
- Posts: 453
- Joined: Thu Apr 20, 2017 5:47 pm
- Country: USA
- Location: AZ
- Contact:
It's a really nice build, did you made it to 10.5" in length?
Jiro wrote: ↑Sun Oct 08, 2017 5:00 pm Mine but still a pistol with full size rifle. My question to you is I read your project on AR15 and you mentioned you opened the GP to 0.093 which is a #42 bit. You put the 0.093 as a #34.
I opened mine to 0.094 and it would not hold open on an empty mag but would chamber another round 85% of the time. A #37 bit opened to 0.109 was what was necessary for proper function. Thoughts?
Thanks.
You do not have the required permissions to view the files attached to this post.
-
- II
- Posts: 9
- Joined: Thu May 11, 2017 5:58 pm
I must have got the size numbers mixed up. I ended on .093" so #42. I'm using a H1 buffer and Wolff reduced power spring so maybe that's why it works with the smaller port? Mines never jammed, except when I was working up to .093"
How's yours work with the maxim can brace? I picked up a used one with JP silent spring at a good price and haven't tried it yet.
Also what rail did you use under the gas block? YHM?
How's yours work with the maxim can brace? I picked up a used one with JP silent spring at a good price and haven't tried it yet.
Also what rail did you use under the gas block? YHM?
-
- L
- Posts: 60
- Joined: Thu Oct 12, 2017 3:27 pm
Subbed. I want to do a T91 pistol as well.
Did you guys just open up the gas port with a hand drill?
Did you guys just open up the gas port with a hand drill?
-
- II
- Posts: 29
- Joined: Sat Oct 07, 2017 4:27 pm
That may be why I was getting the results I got. The brace is GTG and I’m curious as to how yours will work. Probably with the RP spring it’ll be fine, might check it with the standard spring as well.Kaztma wrote: ↑Thu Oct 12, 2017 6:47 am I must have got the size numbers mixed up. I ended on .093" so #42. I'm using a H1 buffer and Wolff reduced power spring so maybe that's why it works with the smaller port? Mines never jammed, except when I was working up to .093"
How's yours work with the maxim can brace? I picked up a used one with JP silent spring at a good price and haven't tried it yet.
Also what rail did you use under the gas block? YHM?
The guns exhibit the same “schwaang” all ARs do when your face is against the stock. Not a big deal for me. May be, suppressed. So the silent spring is not a necessity for me. Is it standard or reduced power? One other point, I have not used any brass i.e. 193/855 and it could possibly be those being a mil spec load may deliver sufficient impulse to lock open on an empty mag at .093. I did not have a chance to check. I generally use steel case because I shoot a lot, it’s cheaper and I’m a tightwad. My 193/855 is in the apocalyptic ammo supply along with the steel core Chinese 7.62x39 and 7.62 NATO and 7N6. Both guns before the mods, took 20-30 rounds before they functioned correctly. Not sure what the deal was with that, probably parts seating but before that, they were single shots. Again, with the steel case. I thought that was odd they they both did the same thing.
Yes on the YHM AR steel gas block. It’s a perfect fit and longer than the T91 rail. I like the Wolf T91 GB and the thicker barrel.
SHAO.... yes, hand drill with TiN bits. Pay attention to the port angle and don’t drill into the bore opposite the gas port in the barrel.
-
- L
- Posts: 87
- Joined: Thu Nov 16, 2017 9:00 pm
I don't want to SBR but I would like a 14.5 with P&W'd A2 flash hider.
Is this barrel removable for that work?
Does it take a special barrel wrench?
Can you reccommend someone to do the work?
Thanks,
Is this barrel removable for that work?
Does it take a special barrel wrench?
Can you reccommend someone to do the work?
Thanks,